Extreme Networks Summit WM Series Betriebsanweisung PDF herunterladen (Seite 104)

Summit WM-Series Switch Configuration: Availability and Mobility

Summit WM-Series WLAN Switch and Altitude Access Point Software Version 1.0 User Guide

104

4 On the other Summit WM-Series Switch that is to be paired, allow all Altitude APs to associate with

it. Then set the Registration Mode to “Allow only approved” so that no more Altitude APs can

5 In the AP Registration screen, now enable the two Summit WM-Series Switchs as a pair, as described

below.

6 On each Summit WM-Series Switch, in the Access Approval screen, check the status of the Altitude

APs. Each set of Altitude APs on the home Summit WM-Series Switch should appear as “local”

while those on the other Summit WM-Series Switch should appear as “foreign”.

A second method to set up the Summit WM-Series Switchs is as follows:

1 In the AP Registration screen, enable the two Summit WM-Series Switchs as a pair, as described

below.

2 Add each Altitude AP manually to each Summit WM-Series Switch. (Select the Altitude AP tab. In

the Altitude AP Properties screen, click on the Add Altitude AP button. The Altitude AP Configuration

subscreen appears. Define the Altitude AP and click on the Add Altitude AP button. In the Access

Approval screen, change the Altitude AP status from “Pending” to “Approved”.)

WARNING!

If two Summit WM-Series Switches are paired and one has the “Allow All” option set for Altitude AP registration,

all Altitude APs will register with that Summit WM-Series Switch.

Set up two Summit WM-Series Switches as a pair, for availability

1 On the Summit WM-Series Switch that is to be the primary, select Altitude APs tab. Click on AP

Registration. The Altitude AP Registration Mode screen appears.

2 Click the Paired radio button.

3 Enter the IP address of the physical port of the secondary Summit WM-Series Switch. This IP must

be on a routable subnet between the two Summit WM-Series Switches.

4 Select a Default Failover WM-AD on the other Summit WM-Series Switch from the drop-down list

of WM-ADs (this list will be populated only after a WM-AD has been defined).

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 227 228

Keine Kommentare

Extreme Networks Summit WM Series Betriebsanweisung Seite 104